There are no products listed under this category.
How long does it take for the INTEX Saltwater System to clear the "green" water from my pool?
Can I hook up a vacuum to the pump?
Will the pump get damaged if splashed with water?
How can I test the chemical level in my pool?
What should I do if I'm experiencing some difficulty connecting the hoses onto the black protruding hose connectors?
What does code 92 mean?
What is your suggestion on pump maintenance?
What is the best way to store the filter pump and/or the saltwater system for the winter?
What is Cyanuric Acid? How much do I need to add?
Why do I have insufficient chlorine output?
Can I use playground sand or sand from the beach in my sand filter system?
After loading the filter media into the tank and setting up everything, the water does not flow into the tank after opening the plunger valves (or removing the black hat-shape plugs) and setting the 6-way valve in filter mode?
How much sand does the INTEX Sand Filter require?
How does the timer work?
Do I add salt to the pool or to the pump?
How much sand does the INTEX Sand Filter & Saltwater system require?
If the INTEX Saltwater System runs too long, will it over chlorinate the pool?
Which pool sets come with the Saltwater System? Can it be purchased separately?
How many functions does the INTEX Sand Filter Pump & Saltwater System control valve have and what are the functions?
How often and how long should I run the INTEX Saltwater System?
Does the Sand Filter Pump & Saltwater System includes hoses or other fittings to attach to an INTEX swimming pool?
How does the salt affect the vinyl?
How do I verify if the Saltwater System is generating chlorine?
Is it safe to swim in the pool while the Saltwater System is operating?
Do you need to use any other chemicals in the pool besides salt? What happens if you put other chemicals in the pool?
Where can I purchase replacement parts?
What is a GFCI outlet?
How do I increase the chlorine output?
What does code 90 mean?
I have a Saltwater System/filter pump combination unit (combo), can I run just the filter pump only after the chlorinator has finished without re-setting or erasing the chlorinator's programmed timer?
I bought an AGP Set with a Saltwater System/filter pump combination (combo), I do not want to add salt because I do not want to use the chlorinator. Is it possible to run just the pump to filter the water at least?
Do you need to purchase a GFCI (ground fault circuit interrupter) or RCD (residual current device) outlet?
Will my pool water be salty?
Does the pump run on AC or DC power?
What type of service is needed to maintain the Saltwater System's performance?
What type and size of media should I use with the INTEX Sand Filter system?
How often should I change the sand in my filter?
How do I remove fine suspended particles?
What does code 80 mean? What should I do if code "80" appears?
Is the INTEX Sand Filter Pump & Saltwater System available for different sizes of pools?
What type of salt should be used with the saltwater generators?
How do I handle the glass media?
Will the INTEX Saltwater System work even if I use well water or hard water?
What should I do when the alarm is on (red LED indicator)?
How does the INTEX Saltwater System generates chlorine?
Is the Saltwater System technology proven?
If my pool loses water, how do I know how much salt to replace? What happens if I add too much salt?
What should I do if code 92 appears?
How many functions does the INTEX sand filter control valve have and what are the functions?
Water is present in the drain/waste outlet port or sediment transparent window, is this normal?
How do I verify if the pressure gauge is faulty?
Why are there tiny little bubbles in the water when the INTEX Saltwater System is running?
Can I stop the timer or change the startup time?
What does code "00" mean? What should I do if code "00" appears?
What should I do if code 91 appears?
What does code 93 mean?
Why are there two water flow ratings for my filter pump, a "Pump Flow Rate" and a "System Flow Rate?"
The air jet valve is leaking water when the filtration pump is not running, what should I do?
When should I use the "Boost" function?
The sand filter fails to clean the water properly, and the water is still cloudy?
How can chlorine last longer in my pool, if it automatically breaks down in sunlight?
What type and size of media should I use with the INTEX Sand Filter & Saltwater system?
What does code 91 mean?
How often should the glass media be replaced?
Will the salt produce any harmful by-products over long periods of time?
Can you run the INTEX Saltwater System with the pool cover on?
Why sometimes is it called Chlorine Generator, since it doesn't actually produce chlorine in the traditional sense?
What is the chemical process that takes place in my INTEX Saltwater System?
Why did I find white flakes in the pool water?
Can I pre-program the startup time like my VCR (Video Cassette Recorder)?
What should I do when water is leaking from the pre-filter cover?
Why is it necessary to backwash the filter media during the initial setup startup and how long I should backwash the media?
Why does my pool still look green even though I followed the instructions described in the Owner's Manual?
What should I do if the sand filter pressure gauge indicator is in the yellow or red zone?
Are any tools required to assemble the pump?
What will happen if iodized salt is used?
Does the Saltwater System prevent algae and bacteria from forming on the bottom and sides of the pool?
Why use the INTEX Saltwater System?
Is the INTEX Saltwater System capable of lifting dirt off the bottom of the pool?
If I am allergic to chlorine, can I still swim in the pool?
Is the chlorine produced by a Saltwater System different than the standard liquid or granule chlorine used in most pools?
Why are INTEX Saltwater Systems better than other products on the market today?
Why do I have algae in my pool even when I run my filter pump regularly?
Can I add pool chemicals to shock the pool water or to balance pool water chemistory?
What should I do if sand is returning to the pool during filtering operation?
What is the warranty period of the INTEX Sand Filter Pump & Saltwater System?
How long should I run the "Boost" function?
My sand filter pump system fails to clean the water properly, do I have the right size for my above ground pool?
What is the meaning of FP?
What should I do if code 90 appears?
How do I reduce the copper concentration in my pool to the recommended level?
What is the preferred pool water chemistry reading?
Which Hydro Aeration adaptor is used with which filter pump?
How do I add Salt?
What if the saltwater is accidentally swallowed? Is it harmful in any way?
What is the INTEX Saltwater System (Chlorine Generator)?
How much salt should be used for my salt water system?
Why is there no display on the LED screen? What should I do?
Does the pump keep the pool walls and bottom clean?
Can I hook up a vacuum to the pump?
The water flow is not as strong as it used to be, why?
Can we use the pool while the filter pump is operating? Is it safe?
Can I upgrade my filter pump to a larger model and what should I do if I want to upgrade my pump?
How do I know if I have a truly defective pump and not just an oversight on my part?
What is the life of the filter pump?
Can the filter pump be operated when a cover is on the pool?
Why are there two water flow ratings for my filter pump, a "Pump Flow Rate" and a "System Flow Rate?"
Does a filter pump have to be used with my INTEX above ground pool?
On Model 603/604, Model 637/637R/638/638R, Model 635T/636T, and Model 633T/634T filter pumps, should I turn on the pump before releasing the air pressure?
What should I do if I'm experiencing some difficulty connecting the hoses onto the black protruding hose connectors?
Can the pump be used to empty the pool?
Is there a written warranty for this product?
How often should the filter cartridge be replaced?
What is the recommended procedure to keep my pool clean while waiting for my replacement pump?
What is the best way to store the filter pump and/or the saltwater system for the winter?
Will the pump get damaged if splashed with water?
Can I disassemble the motor housing to clean the inside?
What is your suggestion on pump maintenance?
What is a GFCI outlet?
Can the filter pump be purchased from INTEX if not available from a local retailer?
If the pump is defective will I be reimbursed for postage?
Should consumers repair the pump themselves?
My filter pump cartridge chamber has a 0.25 inch (0.63 cm) gap or has two dents on the cartridge chamber side threaded edge. Is the pump defective and will it cause water leakage?
I have a Model 637/637R/638/638R filter pump. After receiving the replacement part hoses, they do not fit into the black protruding hose connectors on the side of the pool. Did I receive the wrong hoses?
I have a Model 603 filter pump and the inlet of the impellor housing is not centered inside the filter pump cartridge chamber, is the pump defective?
Do you need to purchase a GFCI (ground fault circuit interrupter) or RCD (residual current device) outlet?
Does the pump meet recognized electrical standards?
Should the plunger valves on Model 635T/636T, and Model 633T/634T be closed when the pump is not running?
How can I find the pump model?
How long should I run my filter pump?
Does the pump run on AC or DC power?
Are any tools required to assemble the pump?