1
$1.76
2
$1.57
3
$2.62
4
$2.04
5
SKU: 18600E
18600E, Filter Cartridge 59900/29000 (type “a") (Discontinued)
Total parts to replace: 1
$6.99
6
$1.63
7
$1.95
8
SKU: 10116
10116, 1.5m X Φ1-1/4" Pump Hose (only Available For 1000gal And Below Filter Pump)
Total parts to replace: 2
$3.81
9
$2.01
10
$2.02
11
$3.80
12
$2.70
13
$2.02
14
$2.46
15
$2.48
16
$1.70
17
SKU: 11469EG
11469EG, 1000 Gal Filter Pump Housing And Motor (120v) (Discontinued)
Total parts to replace: 1
$34.27
18
$2.12
What models and sizes are available?
What are the specifications of the filter pumps?
Can I upgrade my filter pump to a larger model and what should I do if I want to upgrade my pump?
How long should I run my filter pump?
Can we use the pool while the filter pump is operating? Is it safe?
Can I hook up a vacuum to the pump?
Does a filter pump have to be used with my INTEX above ground pool?
What is the life of the filter pump?
The water flow is not as strong as it used to be, why?
How often do I have to replace the filter cartridge?
How can I find the pump model?
How long is the filter pump electrical cord?
Is there a written warranty for this product?
What is a GFCI outlet?
What is your suggestion on pump maintenance?
What is the best way to store the filter pump and/or the saltwater system for the winter?
What should I do if I'm experiencing some difficulty connecting the hoses onto the black protruding hose connectors?
Can the filter cartridge be rinsed and re-used?
What should I do if there is no air bubble coming out of the pool inlet nozzle?
Where can I purchase replacement parts?
Are replacement cartridges available? Where can we get them?
On Model 603/604, Model 637/637R/638/638R, Model 635T/636T, and Model 633T/634T filter pumps, should I turn on the pump before releasing the air pressure?
Does the pump run on AC or DC power?
Do you need to purchase a GFCI (ground fault circuit interrupter) or RCD (residual current device) outlet?
My filter pump cartridge chamber has a 0.25 inch (0.63 cm) gap or has two dents on the cartridge chamber side threaded edge. Is the pump defective and will it cause water leakage?
Does the cartridge pump meet recognized electrical standards?
Can the cartridge pump be used to empty the pool?
Does the cartridge pump keep the pool walls and bottom clean?
The filter gauges on Model C1500 and C2500 show green when the pump is not running or off. How do I view the last status of the filter gauge?
Can the filter pump be operated when a cover is on the pool?
Can I disassemble the motor housing to clean the inside?
Why are there two water flow ratings for my filter pump, a "Pump Flow Rate" and a "System Flow Rate?"
The air jet valve is leaking water when the filtration pump is not running, what should I do?
What does each color of filter gauge tell you?
Should consumers repair the pump themselves?
Will the pump get damaged if splashed with water?
Should the plunger valves on Model 635T/636T, and Model 633T/634T be closed when the pump is not running?
Which models filter pumps need to use the filter cartridge support?
How do I know if I have a truly defective pump and not just an oversight on my part?
What is the recommended procedure to keep my pool clean while waiting for my replacement pump?
Can the filter pump be purchased from INTEX if not available from a local retailer?
I have a Model 603 filter pump and the inlet of the impellor housing is not centered inside the filter pump cartridge chamber, is the pump defective?
Are any tools required to assemble the pump?
Which Hydro Aeration adaptor is used with which filter pump?
If my INTEX pump is defective will I be reimbursed for postage?
The filter gauge shows red but the cartridge appears to be clean, what's the problem?
Why do the filter gauges on the C900 and C1000 have reset buttons while those on the C1500 and C2500 do not?
What cartridge filter pump models include a filter gauge for the 2025 season?
The cartridge filter pump housing has changed for the 2025 season. Has INTEX changed the size or shape of filter cartridges as well?
How are the filter gauges for the C900, C1000, C1500 and C2500 different from each other?
Does the pump keep the pool walls and bottom clean?
Can I hook up a vacuum to the pump?
The water flow is not as strong as it used to be, why?
Can we use the pool while the filter pump is operating? Is it safe?
Can I upgrade my filter pump to a larger model and what should I do if I want to upgrade my pump?
How do I know if I have a truly defective pump and not just an oversight on my part?
What is the life of the filter pump?
Can the filter pump be operated when a cover is on the pool?
Why are there two water flow ratings for my filter pump, a "Pump Flow Rate" and a "System Flow Rate?"
Does a filter pump have to be used with my INTEX above ground pool?
On Model 603/604, Model 637/637R/638/638R, Model 635T/636T, and Model 633T/634T filter pumps, should I turn on the pump before releasing the air pressure?
What should I do if I'm experiencing some difficulty connecting the hoses onto the black protruding hose connectors?
Can the pump be used to empty the pool?
Is there a written warranty for this product?
How often should the filter cartridge be replaced?
What is the recommended procedure to keep my pool clean while waiting for my replacement pump?
What is the best way to store the filter pump and/or the saltwater system for the winter?
Will the pump get damaged if splashed with water?
Can I disassemble the motor housing to clean the inside?
What is your suggestion on pump maintenance?
What is a GFCI outlet?
Can the filter pump be purchased from INTEX if not available from a local retailer?
If the pump is defective will I be reimbursed for postage?
Should consumers repair the pump themselves?
My filter pump cartridge chamber has a 0.25 inch (0.63 cm) gap or has two dents on the cartridge chamber side threaded edge. Is the pump defective and will it cause water leakage?
I have a Model 637/637R/638/638R filter pump. After receiving the replacement part hoses, they do not fit into the black protruding hose connectors on the side of the pool. Did I receive the wrong hoses?
I have a Model 603 filter pump and the inlet of the impellor housing is not centered inside the filter pump cartridge chamber, is the pump defective?
Do you need to purchase a GFCI (ground fault circuit interrupter) or RCD (residual current device) outlet?
Does the pump meet recognized electrical standards?
Should the plunger valves on Model 635T/636T, and Model 633T/634T be closed when the pump is not running?
How can I find the pump model?
How long should I run my filter pump?
Does the pump run on AC or DC power?
Are any tools required to assemble the pump?